Martin DMX 5.3 Splitter Uživatelský manuál stáhnout pdf (Strana 23)

Onboard control panel menus 23

Onboard control panel menus

Default settings are shown in bold print

All temperatures are displayed in both °C and °F

Menu Options Notes

ADDRESS

1 - X

Set the fixture’s DMX address using up and

down buttons (where X is the last useable

address depending on the mode the fixture is

set to)

control mode

HSI HSI color control

HSIC HSIC color control

RGB RGB color control

RGBAW RGBAW color control

pixel grouping

1 Individual control of pixels

DMX MODE 2 Pixels controlled in 3 groups of 2 pixels

3 Pixels controlled in 2 groups of 3 pixels

all

Pixels controlled in 1 group of 6 pixels

(control all pixels at same time)

pixel invert

Pixels swapped left to right (1 moved to 6, 2

moved to 5, etc.)

off Pixels normal

STAND ALONE sa setup

stand alone off Disable stand-alone operation

static colour

Enable static color display – select display

intensity from 0 - 255 for white, amber, blue,

green and/or red

sa: rgb fade Select slow, medium or fast RGB sequence

sa: rgbaw fade Select slow, medium or fast RGBAW sequence

sa: pastel fade

Select slow, medium or fast pastel colors

sequence

ADJUSTMENT

red Manually set red intensity

green Manually set green intensity

blue Manually set blue intensity

amber Manually set amber intensity

white Manually set white intensity

PERSONALITY backlight

intensity

Set display backlight intensity to high, medium

or low

delay

Set time before display backlight goes into sleep

mode to 15 secs., 30 secs. or 2 mins.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Martin DMX 5.3 Splitter Uživatelský manuál Strana 23

Komentáře k této Příručce